My first ever DIY stencil tees

Going through a box of photos (remember when we used to print everything?) I came across a couple of bad ones picturing the first ever t-shirts I did, mentioned at my first post on this blog. These were done around 2002 if I remember well. Here are some rough scans, heavily cropped.

kimbo_tees_stencil_spray_paint_fugazi

There’s not much to add to this. Just standard paper-cut stencils and spray paint. Anyone can easily work their way through such a tee. Spray paint does faint eventually, after washing a lot of times, but to be honest I never tried fabrics spray paint, just whatever type I found at home. Best way’s to have fun with it!

kimbo_tees_stencil_spray_paint_queen_is_dead

Remaking a destroyed t-shirt: Fugazi Repeater photos

I absolutely love Fugazi’s Repeater all the way through, great album. Used to listen to it a lot when I was younger. The cd booklet contained some of their best B&W photos. Going through these I came up with the idea of placing 2 square photos on a t-shirt, the guitarist and bass player turning their backs to the photographer and each other, but kind of like jamming or something like that.

kimbo_tees_fugazi_repeater_cd_booklet_2

kimbo_tees_fugazi_repeater_cd_booklet_1

I have to say that I did print that t-shirt  first at a tees printing shop in my neighbourhood, used a plain white one. That was quite a long time ago. Well, that one didn’t survive to see much, it was thrown away after getting soaked in red wine along with some other clothes back in 2003.

kimbo_tees_fugazi_repeater_iron_transfer_1

As I was really fond of it, I just had to reproduce it once again by myself. Nothing difficult there, 2 black & white photos scanned and lightly photoshoped, I used a color tee this time (should have sticked to a white one, I think it looked much better) and it was ready.

kimbo_tees_fugazi_repeater_iron_transfer_2

Got this for about a decade now, it seems to be getting pretty worn down so a new reproduction might be on its way.

First iron-on transfer attempt: Fela Kuti t-shirts

So I’m missing photos of the first stencil t-shirts I did back in 2002. They’re all gone now, used for dusting or something like that.

I remember two specifically. The first one was a simple black spray paint FVGΛZI” white tee, same as the stencil Fugazi used on their equipment. Didn’t tag it with anything else like, let’s say, the typical “This is NOT a Fugazi t-shirt” phrase. The other one was a Smiths inspired “THE QUEEN IS DEAD” green spray paint on white t-shirt, done in common stencil fonts, sort of like that sign Morrissey used to hold in 80’s concerts. Forgot that somewhere, never got it back…

kimbo-tees-fela-kuti-iron-on-transfer-1

Anyway, it was 2003 when I decided to try iron-on transfer paper for the first time, bought some Pelican sheets (were pretty good actually) and a couple of Pull & Bear t-shirts and headed home. My idea was to photoshop and print a classic Fela Kuti album cover in black & white and use it on light, yet bright color t-shirts.

First attempt was a disaster. Paper got stuck on the yellow tee and I couldn’t find a way to get it off. Got thrown in the garbage bin so I could move on to the next one.

kimbo-tees-fela-kuti-iron-on-transfer-2

Red one turned out pretty good. Pulled the paper up as it was still hot so I could get that matte finish instructions suggested. Had some missing parts on the corners though and decided to use remaining parts of the sheets to cover those up. After years and years it turns out that corners are still pretty black and that Fela Anikupalo Kuti name tag in the bottom right didn’t go anywhere either.

kimbo-tees-fela-kuti-iron-on-transfer-3

Here’s a tip, I got that pulling the first tee out of the garbage bin… If transfer paper gets shredded as you pull it off and you have small pieces all over, slightly reheat those parts with the iron and use a knife for removal. Works great!

Photos were taken recently. This is what they look like 10 years on. Don’t wear them that often nowadays…